When you purchase the HashBoard EEPROM Edit Line, you will get the program editing software for the HashBoard. Unzip the software and install the driver: Double-click the file to install it in the default way
After the driver is installed, click and run the program: Select the chip type, manufacturer, and name in the dialog window. In general, the default settings are acceptable.
Connect the hashboard to the computer via the programming cable, and the dialog window will prompt "Device connected". Click "Read"（读取）, the program will read the file of the hashboard, and the program will temporarily retain the data. Then replace another hashboard and click "Program"（编程） to copy the file to another hashboard.
After writing is complete, you can click "Verify" （效验）at the top of the window to confirm.
