BM1366 BM1368 Series ASIC Chip Tester User Manual
By THANOSMINING
August 13th, 2024
Introduction:This ASIC chip tester adopts a high-frequency data solution, which greatly improves the test speed and accuracy.
It can complete the test of an ASIC chip within 2 seconds, greatly improving work efficiency.
How to use:①Effectively connect the power adapter to the tester to ensure that each interface is firmly in contact.
After power on, the power adapter indicator light is always on.
After about 3 seconds, the tester screen lights up and the fan starts automatically.
②Insert the ASIC chip in the correct way,
Please note the separation line on the back of the ASIC chip, which should correspond to the tester base.
③Cover the test base cover and press the "Test" key to test.
④After the test is completed, a healthy ASIC chip will prompt "PASS" on the LED, and a bad chip will prompt "Error"
Important Note:
Any illegal operation may damage the device or ASIC chip.
Please operate strictly in accordance with the user manual.
Our company is not responsible for any damage caused by illegal operation.
Please pay attention to this. Thank you!
Previous
APW12 PSU Tester User Manual
Read More
Next
HashBoard EEPROM Edit Line User Guide
Read More
