1. Be aware of the following safety precautions to avoid personal injury and to prevent
The fan is damaged;
2. In order to avoid possible dangers, please be sure to use this product in accordance with the regulations;
3. Only qualified technicians can perform maintenance procedures;
4. To prevent fire or personal injury;
5. Use an appropriate power supply, and the product must be correctly connected to the power supply (recommended to use a short-circuit protection function
power supply);
6. Connect the fan correctly (only one fan can be connected for each test), if the function of the fan pin cannot be identified
Yes, please do not connect randomly;
7. Please pay attention to the accidents caused by the entanglement of objects caused by the fan blades when the fan is rotating at high speed;
8. Check the ratings of all fans To prevent fire or personal
Description of the value and marking;
9. Before connecting the fan, please read the product manual for further information on operation;
10. Do not operate if you suspect that the product is malfunctioning;
11. If you suspect that the product is damaged, please have it checked by qualified maintenance personnel;
12. Keep the product surface clean and dry;
Terms used on this product
The following terms appear on this product:
RPM: RPM is the abbreviation of Revolutions Per Minute, that is, revolutions per minute, indicating the number of rotations of the device per minute;
PWM: pulse width modulation technology, using PWM to adjust the speed of the fan;
1. Functional description
The F1 fan tester can test most of the 4-wire and 6-wire PWM fans with a working voltage of DC12V on the market. with fan
The speed test has a standard detection function, and the test results will be directly displayed on the screen, which is convenient and intuitive to see whether the fan speed is up to standard.
PWM is divided into two modes: automatic mode and manual mode, the user can switch the test mode arbitrarily. Native language is divided into Chinese and English
Two types, the user can switch freely, the functional interface is simple and easy to understand, which greatly improves the user's work efficiency.
2. Tester interface description
Interface part:
1 - Power interface, the input voltage is DC12V;
2 - 4-pin fan socket (four-wire fans such as Ant Core);
3 - 6-pin fan socket (Note! Only for Whatsmart);
4 - 2*2, 4-pin fan socket (Avalon);
Button part:
5 - The "+" button is used to change menu options or increase values;
6 - The "-" button is used to change menu options or decrease values;
7 - The "OK" button is used to save the set parameters (after each data modification, you need to press "OK" to save;
8 - The "MENU" button is used to open the menu,Number setting and adjustment;
3.Instructions for use-- (3.1) User Interface
1. The test result after the fan is connected (the current mode is "automatic"
valid, "Manual" mode will close the test results);
2. The real-time speed of the fan under test;
3. Fan speed adjustment, when PWM=100%, the fan will be at full speed
Running, when PWM=50%, the fan runs at 50% speed,
When PWM=10%, the fan will rotate at a lower speed;
(3.2) Menu and function explanation
In the user interface, short press the "MENU" button once to enter the menu, press the "+" or "-" button to adjust the parameters, after adjustment
Press "OK" to save the settings.
After entering the menu, short press the "MENU" button to switch options, when the option is "Device SN:", press "MENU" again
to return to the user interface.
1. "Current mode" (fan speed adjustment mode) has two options: automatic and manual, automatic mode can quickly adjust the fan speed
The speed is tested in stages, the PWM adjustment range of manual mode is from 10-100%, which is suitable for driving unconventional fans (core-driven
Some fans increase the speed when the PWM is reduced, and reduce the speed when the PWM is increased). Note that switching
After switching to manual mode, the fan speed qualification test function will be disabled.
2. "Fan speed qualified test" This option is valid in the automatic test mode.
Sampling and comparison of the detected fan speed within the range, if the fan speed is lower than the test set by the user when the test time is reached
The speed is unqualified, the horn will beep twice continuously, and the "test result" in the user interface will be displayed as "failure".
When the fan speed and start-up time reach the parameters set by the user, it is qualified, the horn beeps once, and the "test result" on the user interface
Displayed as "Passed".
3. "Automatic test time" means the time required for a fan to go from 0RPM to 6000RPM after it is powered on, different sizes
The time required for different fans is also different, and the time can be adjusted according to the actual situation (the adjustment unit is second), set a
A reasonable test time can effectively improve the efficiency of fan testing.
4. "Test speed" Take Nidec12038 (ant) fan as an example, a qualified fan speed should be 6000RPM or
or above 6000RPM, we can set the "test speed" parameter to "6000", in this option, you can long press
"+" or "-" two keys for quick parameter adjustment.
5. "Language" The text displayed by the device has two languages, namely Chinese and English.
6. "Sound" When the parameter is "On", the user will press the button and there will be a corresponding prompt sound, and the fan test result will also be displayed.
beep. When the parameter is "off", the whole device is in silent mode.
7. "Equipment SN" is the factory serial number of the tester, which is meaningless to the user.
Fan socket pin definition:
Kind tips:
The interface of the tool can be adjusted to display in "English". The default is Chinese, please adjust it according to your needs.