Antminer hash board PIC file burning tutorial
By Thanosmining
February 17th, 2020
Hash board PIC file, built-in key data and setting parameters of Hash board operation. If the file is abnormal, the hash board cannot run.
At this point, we need to update the hash board. The tools we need are:
Computer, PICkit3 or PICkit3.5 or PICkit4.
First, we need to download and install the PICkit burning tool (please get it from the PICkit official website), and then connect the computing power board to the computer through PICkit. The USB end is connected to the computer, and the Dupont cable (6-pin) is connected to the data burning contact of the hash board.
TThe contacts on the Antminer Hash board are easy to find, they are 6 contacts side by side, use 6 pin Dupont wire to connect the contacts.
At this point, we open the downloaded program "MPLAB IPE".
1. Select device: PIC16F1704,
2. Click "power" to select the power supply mode,
3, and then click "operate",
4. Select "file", find the file to be burned (.HEX file),
5. Click "connect" to connect,
6. Click the "program" button, click "verifiy" after completion,
7. Prompt that the verification is completed, which proves that the programming is successful.
Previous
XSHELL 5/6/7 Configuration Tutorial (Test Fixture Software Program)
Read More
Next
Miner Fan Speed Meter User Manual
Read More
